Author
Arqam Laya(1
(1) Universitas Negeri Gorontalo, Gorontalo Indonesia,
(2) Universitas Negeri Gorontalo, Gorontalo Indonesia,
(3) Universitas Negeri Gorontalo, Gorontalo Indonesia,
(4) Universitas Negeri Gorontalo, Gorontalo Indonesia,
(5) Universitas Negeri Gorontalo, Gorontalo Indonesia,
| Article Analytic |
Available online: 2026-07-30 | Published : 2026-07-30
Copyright (c) 2026 Arqam Laya, Satar Saman, Muhammad Rizal Mahanggi, Berni Idji, Anton Kaharu
Article can trace at:
Article Metrics
Abstract Views: 14 times
PDF Downloaded: 8 times
Abstract
Road reconstruction works in dense urban corridors, such as the Brigjen Piola Isa CS segment passing through health and educational facility zones, pose high risks of traffic congestion and occupational accidents. This community service project aimed to provide technical assistance for implementing the Construction Safety Management System (SMKK) and traffic control management to the executing contractor partner (PT. Tri Sandi Yudha) and local traffic wardens. The implementation method comprised interactive socialization, safety equipment training, and direct field assistance for traffic zone arrangements. The results showed an increase in worker awareness and compliance regarding the consistent use of standard Personal Protective Equipment (PPE), including safety helmets, safety shoes, and reflective vests. The provision of fire extinguishers (APAR) and temporary safety signs was also successfully integrated into the work area. In terms of traffic management, the structured deployment of traffic cones and warning light sticks effectively mitigated potential traffic congestion and minimized accident risks for road users in active urban corridors. This assistance program successfully established a safe, orderly, and security-compliant construction workspace.
Keywords
References
Badri, A., Boudreau-Trudel, B., & Souissi, A. S. (2018). Occupational health and safety in the industry 4.0 era: A cause and effect analysis. Safety Science, 109, 403411. https://doi.org/10.1016/j.ssci.2018.06.012
Bire, A. L., & Sugiyanto, G. (2021). Evaluasi manajemen lalu lintas pada area kerja rekonstruksi jalan urban. Jurnal Rekayasa Sipil dan Lingkungan, 5(2), 112121.
Badan Standarisasi Nasional. (2019). SNI 8798:2019 tentang Rambu Lalu Lintas dan Pembatas Area Kerja Sementara pada Konstruksi Jalan. Jakarta: BSN.
Direktorat Jenderal Bina Marga. (2020). Spesifikasi Umum Bina Marga 2018 untuk Pekerjaan Konstruksi Jalan dan Jembatan (Revisi 2). Jakarta: Kementerian Pekerjaan Umum dan Perumahan Rakyat.
Harianja, R., & Perdana, A. (2022). Pendampingan keselamatan dan kesehatan kerja (K3) konstruksi pada pekerja proyek infrastruktur jalan. Jurnal Pengabdian Kepada Masyarakat (JPKM) Tekno, 3(1), 4552.
Kementerian Pekerjaan Umum dan Perumahan Rakyat. (2021). Peraturan Menteri Pekerjaan Umum dan Perumahan Rakyat Nomor 10 Tahun 2021 tentang Pedoman Sistem Manajemen Keselamatan Konstruksi (SMKK). Jakarta: Kementerian PUPR.
Nurdin, M., & Pratama, R. (2023). Penerapan traffic management system dan keselamatan kerja pada zona proyek jalan padat lalu lintas. Jurnal Infrastruktur dan Lingkungan, 9(1), 2938.
Prasetyo, E., & Handayani, S. (2020). Penerapan metode Tool Box Talk (TBT) dalam meningkatkan kesadaran K3 pekerja lapangan pada proyek infrastruktur. Jurnal Aplikasi Teknik Sipil, 18(2), 201208.
Sugiyono. (2019). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Bandung: Alfabeta.
Undang-Undang Republik Indonesia Nomor 22 Tahun 2009 tentang Lalu Lintas dan Angkutan Jalan. Lembaran Negara Republik Indonesia
Refbacks
- There are currently no refbacks.




