Polylactic Acid (PLA) is a type of bioplastic derived from renewable materials such as corn starch and cassava. This material has advantages because it is biodegradable and environmentally friendly. However, PLA has weaknesses in terms of mechanical strength, particularly in tensile strength and resistance to high temperatures. To improve these characteristics, material modification is required by adding natural reinforcing materials. In this study, cassava peel waste was used as a reinforcing material because it contains a high amount of cellulose fiber and is abundantly available. The material fabrication process was carried out using the injection molding method with temperature variations of 160C, 175C, and 190C. Mechanical property testing was conducted using the ASTM D638 standard to determine the effect of temperature on the tensile strength of the PLA + cassava peel composite material. The results showed that variations in processing temperature influenced the tensile strength, where certain temperature increases were able to enhance the flexibility and tensile strength of the material. This research contributes to the development of stronger and more environmentally friendly PLA-based bioplastics. The utilization of cassava peel waste not only improves the mechanical properties of the material but also provides a solution for agricultural waste management. It is expected that the results of this research can be used as a reference for innovations in sustainable alternative materials for various industrial applications.

PLA, cassava peel, injection molding, ASTM D638.

Alqap, A. S. F., Hestiawan, H., Suandi, A., Zuliantoni, Z., & Farid, M. (2023). Kaji sifat fisik biokomposit polylactic acid berpenguat serbuk cangkang kerang lokan. Turbo : Jurnal Program Studi Teknik Mesin, 12(2), 290296. https://doi.org/10.24127/trb.v12i2.2857

Ayu, N., Jumiati, E., & Husnah, M. (2023). Analisis Uji Mekanik Bioplastik Berbahan Pati Tepung Sagu- Kitosan Dan Sorbitol. Journal Online of Physics, 8(3), 4750. https://doi.org/10.22437/jop.v8i3.23332

Dana, H. R. (2023). Synthesis , properties , and applications of polylactic acid-based polymers. October 2021, 2243. https://doi.org/10.1002/pen.26193

Darmalaksana, W. (2020). Metode Penelitian Kualitatif Studi Pustaka dan Studi Lapangan Wahyudin. 16.

Guo, X., Yao, Y., Zhao, H., Chi, C., Zeng, F., Qian, F., & Liu, Z. (2021). Science of the Total Environment Environmental impacts of functional fi llers in polylactide ( PLA ) -based bottles using life cycle assessment methodology. Science of the Total Environment, 788, 147852. https://doi.org/10.1016/j.scitotenv.2021.147852

Latief, A. E., Anggraeni, N. D., & Rhamdani, W. (2020). Metal:Jurnal Sistem Mekanik: Jurnal Sistem Mekanik dan Termal Proses Pembuatan Mesin Injection Molding Hand-Press untuk Plastik Komposit. 02, 9498.

Li, X. (2022). A review of research and application of polylactic acid composites.

November, 122. https://doi.org/10.1002/app.53477

Prakaryuda, W. A., Halim, A., Aditya, C., Etika, P., Sipil, J. T., Teknik, F., Malang,

U. W., & Tambah, B. (2021). Pengaruh penambahan damdex pada campuran beton terhadap kuat tekan dan modulus elastisitas beton. 1(2).

Purnama, P., Samsuri, M., & Iswaldi, I. (2022). A Review on Fully Bio-Based Materials Development from Polylactide and Cellulose Nanowhiskers. 119.

Ravi, M., Saputra, B., & Supriyo, E. (2020). PEMBUATAN PLASTIK BIODEGRADABLE ZnO DAN STABILIZER GLISEROL. 01(1), 4151.

Roni, L. (2024). VALORISASI PLASTIK LDPE DALAM BIOKOMPOSIT PLA DAN PARTIKEL SERAT PISANG.

Siregar, I. R., Fa, M., & Alimi, S. (2022). EKSPERIMEN UJI KEKUATAN TARIK KOMPOSIT DENGAN RESIN EPOXY DAN PENGUAT SERAT KULIT SINGKONG MENGGUNAKAN. 8(2), 220226.

Tripathi, N., Misra, M., & Mohanty, A. K. (2021). Durable Polylactic Acid ( PLA ) - Based Sustainable Engineered Blends and Biocomposites : Recent Developments, Challenges,andOpportunities. https://doi.org/10.1021/acsengineeringau.1c00011

Warsiki, E., Setiawan, I., & Hoerudin, H. (2020). Sintesa Komposit Bioplastik Pati Kulit Singkong-Partikel Nanosilika Dan Karakterisasinya. Jurnal Kimia Dan Kemasan, 42(2), 37. https://doi.org/10.24817/jkk.v42i2.3535

Zaeni, A. (2024). Studi Eksperimen Biokomposit Serat Kelapa dan Kulit Singkong Terhadap Ikatan Matriks dan Kekerasan Kampas Rem. 2(2), 97103.

Zhao, P., Zhang, J., Dong, Z., Huang, J., Zhou, H., Fu, J., & Turng, L. (2020). Intelligent Injection Molding on Sensing , Optimization , and Control. 2020.