1. Home
  2. Vol 4, No 1 (2026)
  3. Anugrah

Redesign of a Fried Shallot Oil Draining Machine with a Capacity of 1 kg

Author


Muhammad Gilang Rifky Anugrah(1Mail),
(1) Teknik Mesin, Fakultas Vokasi, Universitas Negeri Surabaya, Indonesia 60231,

Mail Corresponding Author
Article Analytic
  [File Size: 401KB]  Language: en
Available online: 2026-01-26  |  Published : 2026-01-26
Copyright (c) 2026 Muhammad Gilang Rifky Anugrah
Article can trace at:

Article Metrics

Abstract Views: 22 times PDF Downloaded: 3 times

Abstract


This study aims to improve the performance and stability of a 1 kg capacity fried onion oil drainer (spinner) used by MSMEs. The main problems with conventional machines include excessive vibration at high speeds, a less sturdy frame, and the absence of a rotational speed regulator, which reduces draining effectiveness. The method used is engineering design through the stages of literature study, redesign, manufacturing, assembly, and performance testing. The redesign was carried out by strengthening the frame using hollow iron, adding rubber pads as vibration dampers, and installing a dimmer on a 135 watt AC electric motor. Tests were carried out at speeds of 800 rpm, 1200 rpm, and 1400 rpm with a draining time of 10 seconds. The test results showed that the redesigned machine had better performance and stability. Optimum performance was obtained at a speed of 1400 rpm with 206 grams of drained oil and a final weight of fried onions of 775 grams. The redesign was proven to be effective in increasing draining effectiveness and reducing engine vibration at high speeds.

Keywords


Fried Onions, Oil Draining Machine, Redesign, Spinner

References


Arif, Z., Santoso, N. A., Nugroho, B. I., Murtopo, A. A., Surorejo, S., Syefudin, S., & Santoso, B. A. (2025). Pengembangan kapasitas usaha klasterisasi bawang merah: Diversifikasi produk bawang merah dan strategi pemasaran di era digitalisasi. Jurnal Akademik Pengabdian Masyarakat, 3(3), 1216. https://doi.org/10.61722/japm.v3i3.435

Dwiyanti, N., Istiqamah, A. N., Kamasi, J. J. N., Azzahra, R. A., Nuraisyah, N., Firmansyah, A. M., & Amijaya, M. (2025). Pengembangan pemasaran UMKM pada usaha bawang goreng di Pasar Inpres Kota Palu. Jurnal Akademik Pengabdian Masyarakat, 3(1), 4043.

Farida, Ariyanti, S., Prabowo, H. A., & Husnur, A. (2022). Penggunaan teknologi tepat guna bagi pengerajin bawang goreng di Kelurahan Palmerah, Jakarta Barat. PASAI: Jurnal Pengabdian Kepada Masyarakat, 1(2), 5865. https://doi.org/10.58477/pasai.v1i2.47

Fitriana, H. L., Feriantono, I., Laily, S. I., & Jakaria, R. B. (2024). Redesign mesin guna meningkatkan produktivitas menggunakan metode Zero-One. Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika, 2(4), 236244. https://doi.org/10.61132/jupiter.v2i4.445

Hamid, F. (2021). Perencanaan redesign visual identity Sui Generis sebagai upaya meningkatkan brand awareness [Skripsi]. Universitas Dinamika.

Ibrahim, M., & Ernawati. (2025). Pengaruh teknik penirisan menggunakan spinner terhadap mutu produk Teriyummy. PENARIK: Jurnal Ilmu Pertanian dan Perikanan, 2(2), 279284.

Irwan Syah, & Darmawan, I. A. (2024). Preventive maintenance motor listrik 380 V pada penggerak sistem belt conveyor di PT Indonesia Power PLTU Banten 2 Labuan Omu. Venus: Jurnal Publikasi Rumpun Ilmu Teknik, 2(2), 2240. https://doi.org/10.61132/venus.v2i2.242

Irwanda, R. (2019). Analisa ketahanan dan perawatan bearing UCFL206 pada mesin pencacah limbah botol plastik dan softdrink kapasitas 15 kg/jam [Skripsi]. Universitas Muhammadiyah.

Lailatul Fitriana, H., Feriantono, I., Laily, S. I., & Jakaria, R. B. (2024). Redesign mesin guna meningkatkan produktivitas menggunakan metode Zero-One. Jupiter: Publikasi Ilmu Keteknikan Industri, Teknik Elektro dan Informatika, 2(4), 236244. https://doi.org/10.61132/jupiter.v2i4.445

Maulana, A., Ariyanto, A., & Yudo, E. (2025). Analisis penyebab getaran pada mesin peniris minyak untuk mencegah kerusakan produk keripik bayam milik UMKM Jabal Dinar. Jurnal Inovasi Teknologi Terapan, 3(1), 214219. https://doi.org/10.33504/jitt.v3i1.307

N, R. P., Anggoro, P. W., & Yuniarto, A. T. (2022). Redesain mesin spinner pada UMKM Putri 21 untuk mengurangi getaran pada foundational bolt menggunakan finite element analysis software SOLIDWORKS 2018. Jurnal Rekayasa Mesin, 17(1), 21. https://doi.org/10.32497/jrm.v17i1.2897

Oei, C., Gultom, M., & Ranteallo, O. T. (2024). Analisis pengaruh derajat kemiringan terhadap kinerja electric trolley tabung gas oksigen di RSUD Abepura. Jurnal Simetrik, 12(1), 806811.

Sofii, Y. K., & Sudarman, S. (2022). Dissemination of oil draining machine technology for MSMEs cassava chips Maju Jaya Singosari, Malang Regency. Community Empowerment, 7(6), 10061012. https://doi.org/10.31603/ce.6555

Supriyati, Suhendra, Windyatri, H., Irwati, D., Riandani, A. P., & Widya, A. R. (2025). Pengarahan teknik pengembangan produk berbasis kebutuhan konsumen (customer needs) pada UMKM bawang goreng. Madaniya, 6(1), 99107.

Wahyudi, D., Haryono, Noor, M. F., Abdillah, H., Sholehudin, M., Nurdianto, D. R., & Maulidi, M. I. (2024). Peningkatan kualitas produksi bawang merah goreng dengan appropriate technology di Kabupaten Probolinggo. Jurnal ADIMAS, 8(2), 99106. https://doi.org/10.24269/adi.v8i2.10184

Wulandari, A., Ramadhani, A. A., & Putri, J. K. (2024). Pengembangan alat peraga motor listrik sederhana pada materi gaya Lorentz. Journal on Education, 6(4), 1826818275. https://doi.org/10.31004/joe.v6i4.5700

Bagia, I. N., & Parsa, I. M. (2018). Motor-motor listrik. Rasibook.


Refbacks

  • There are currently no refbacks.

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.